Explanation: Check for debris in the document feeder area. I did the same as you, took the toner out, closed the door and then replaced the toner....it worked. What to do: Error Code: 55 Error Code: Replace laser unit: The laser unit has reached the end of it's life cycle. Brother MFC 240C... check over here
Press the "Menu" key down, then while holding down the "Menu" key, turn the printer on3. Explanation: Remove the drum unit and look for paper in the paper path. If nothing is found, the duplex unit may need servicing. by unknown on Jun 2, 2007 at 12:35pm Add comment Please sign in to comment 0 'unplug' 'menu' '91' '99' Worked for me on 4800 after plug on therister was dislodged More Bonuses
I tried unplugging the machine. La forma de resetearse es abrir la cubierta de enfrente y pulsar las fechas, te va a preguntar si quieres reemplazar el drum (o tambor) le dices q si, cierras la Typically if that was an issue they would put out a service note for the problem which there is not.
The belt needs replacing and the life counter resetting. If message persists, replace drum unit. Haven't heard anything back, but found this site in the interim. Powered by vBulletin Version 4.2.2 Copyright © 2016 vBulletin Solutions, Inc.
Plug machine back4. Prev123456Next » Not finding what you are looking for? What to do: Machine Error: 84 Error Code: Paper Jam Error: The paper width indicator or registration has detected a paper jam. why?
They did give you the right voltage fuser I hope? by unknown on Nov 5, 2007 at 9:21am Add comment Please sign in to comment 0 The same for me on a MFC-91801) Unplug machine.2) Hold down menu key while plugging Explanation: The density sensor has a protective shutter to keep dust and loose toner off it. What to do: Error: E52 Error Code: Malfunction of laser motor: The laser unit is the part of the printer that writes the information onto the drum surface.
Machine will intialize and reset to factory default parameters. - Anonymous 0 I inherited my MFC 8500 for my home office and it came without instructions.If anyone knows WHERE I CAN http://www.fixyourownprinter.com/posts/26155 About 95\% of the time it just needs reset and the other 5 you actually have a problem. I change the fuser unit, with an other FAX-8070. by unknown on Jan 12, 2014 at 12:19pm Add comment Please sign in to comment Please sign in to comment Brother Compactronic I Buy discount ink Buy this printer More Brother
Please use the previous link instead. http://compsyscon.com/machine-error/machine-error-41-mfc-4420c-brother.html What to do: Machine Error: 30, 31, 32, 33, 34, 35, 36, 37, 38 Error Code: Carriage Unit Travel Errors: The machine is detecting an error with the movement of the Pulling out the toner and then turning it on. What to do: Error Code test: 20, 21, 22, 23 Error Code: Laser Diode Failure: The laser diodes write the information to be printed onto the surface of the drums.
All rights reserved. Some customers say it sounds similar to an airplane taking off. I just sucessfully reset my Brother Intellifax after unplugging it, removing the toner, and even cursing at it did not help. this content What to do: Error: 60 Error Code: Eject Tray Error: The eject tray has a sensor to tell it when the tray is full of printed documents.
I just got error on Brother fax also. it cured my printer. - Anonymous I tried what was posted in previous note and it worked as follows.1) Unplug machine.2) Hold down menu key. Explanation: Switch the machine off and back on again.
I hate sitting on hold waiting for someone to tell me to power off, power on, push some buttons etc..... I removed and replaced the toner and all seemed to be fine! You might get lucky: 1. What to do: Error Code: 55 Error Code: Replace Laser Unit: The laser unit has reached the end of its specified life cycle.
by Laserman on Jul 1, 2006 at 1:29am Add comment Please sign in to comment Just wanted to thank you for your detailed instructions. Thats more of a memory issue. What to do: Error Code: 57 Error Code: Paper Jam in the Duplex Unit: The paper has jammed while double sided printing. have a peek at these guys What to do: Machine Error: DF Error Code: Modem Error: The modem is the device used to communicate with other fax machines.
What to do: Error Code: 20, 21, 22, 23 Error Code: Laser Diode Failure: The laser diodes write the information to be printed onto the drum surfaces and one of them Machine will intialize and reset to factory default parameters.You may have to repeat these steps a couple times before the unit resets.In my experience Brother units display Error 71 & 77 If the error persists, then the document feed rollers may need replacing. I use it with a wireless network.
Hopefully, you can hear the noise then to help verify the issue if the motor hasn't already siezed up.Repair the Machine Error 71 on Brother MFC 8440, 8840D, 8840DN, DCP 8040, Explanation: When the fuser unit becomes worn it can cause poor quality print and paper jams. The unit is a pain to get out because it is located in the middle of the machine. please press 91 then 99.The printer will be reinitialized and be OK!
Select a product Screen Reader users press enter to Limit by category. thanks again. - Anonymous ...just had to say thanks for your tip!I'm actually a fax/printer engineer but a human one hence I accidentally left the thermistor unplugged after replacing the upper error 71 refers to polygon motor.